Eco Concrete Etcher is a water-based non-hazardous, non-corrosive, biodegradable, odorless, VOC free, non-flammable concrete etching and cleaning solution. This advanced formula incorporates a blend of organic chemicals and surfactants for the most effective concrete etching solution available. It does not contain phosphoric or hydrochloric (muriatic) acids which present health and environmental risks. including toxic fumes and corrosive run-off.
Eco Concrete Etcher is the preferred eco-friendly and user friendly etching alternative for interior or exterior surface preparation. It opens the pores on hard-troweled or non porous surfaces allow better adhesion prior to application of any of our Concrete Sealer products.
Eco Concrete Etcher is also ideal for cleaning, degreasing and acid etching concrete floors, walls, basements, garages, factories, warehouses, driveways, swimming pools, patios, and containment areas prior to coating, staining or sealing. It can be used on concrete, masonry, cinder block, brick, mortar joints and grout to properly prepare substrates for optimum penetration and adhesion of stains, paints, industrial coatings, and sealers. It also removes dirt, clay, mortar deposits, rust and efflorescence and reduces the pH of new concrete which can burn off sealers, paints and stains.
Eco Concrete Etcher is supplied as a ready to use product which covers 250 to 500 sq. ft. per gallon depending on the concretes’ porosity. Apply with a pump up sprayer or watering can and scrub the surface with a stiff brush for 15 minutes without allowing the product to dry out. Rinsing thoroughly with water 2 or 3 times to neutralize the etching action.